| Part Number : 300-266HS100J | Alternate P/N : 300266HS100J |
| NSN : 5905-00-909-51175905009095117 | Item Name : Resistor Variable W |
| Manufacturer : Control Data Corp | CAGE Code : 15920 |
| FSC : FSC5905 Resistors | NIIN : 009095117 |
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-909-5117 Item Description: Resistor Variable W | 5905 | 009095117 | 0 | N | B | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | B | A | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 300-266hs100j | 5 | 1 | C | A |
| MRC | Criteria | Characteristic |
|---|---|---|
| ADAQ | BODY LENGTH | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 10.0 OHMS SINGLE SECTION |
| ADAT | BODY WIDTH | 0.200 INCHES MAXIMUM |
| APXH | TERMINAL LOCATION | REAR END |
| SR-1 | MFR SOURCE CONTROLLING REFERENCE | 966034-1 |
| ABWV | SHAFT DIAMETER | 0.058 INCHES MINIMUM AND 0.098 INCHES MAXIMUM |
| CBME | III CUBIC MEASURE | 0.052 CUBIC INCHES |
| CBBL | FEATURES PROVIDED | HUMIDITY PROOF |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| AEDZ | SHAFT BEARING TYPE | BEARING |
| AEDX | SHAFT STYLE | ROUND, SLOTTED |
| AAPN | SECTION QUANTITY | 1 |
| ABXF | SHAFT LENGTH | 0.045 INCHES MAXIMUM |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 175.0 SINGLE SECTION |
| SR-1 | SPEC/STD CONTROLLING DATA | |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 WIRE LEAD |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 8280.0 MINIMUM AND 13680.0 MAXIMUM |
| TEST | TEST DATA DOCUMENT | 94580-966034 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.513 INCHES MINIMUM AND 0.526 INCHES MAXIMUM |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| ABTB | MOUNTING HOLE DIAMETER | 0.090 INCHES MINIMUM AND 0.098 INCHES MAXIMUM |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 8280.0 MINIMUM AND 13680.0 MAXIMUM |
| AEFK | MAXIMUM STARTING TORQUE | 10.00 INCH-OUNCES |
| AEFL | MAXIMUM RUNNING TORQUE | 10.00 INCH-OUNCES |
| ADAU | BODY HEIGHT | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| AAQL | BODY STYLE | RECTANGULAR W/MOUNTING HOLES |
| CSDL | STANDARD TAPER CURVE PER SECTION | A SINGLE SECTION |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AFJN | III FRAGILITY FACTOR | MODERATELY RUGGED |
| SR-1 | MANUFACTURERS CODE | 94580 |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -50.0 TO 50.0 SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION |
All Orders are Fulfilled in the U.S.A.
All shipments must comply with U.S.A export laws.
No exceptions.
The only independent distributor
with a NO CHINA SOURCING Pledge
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”.
Don't Forget That We Can Give You a Quote for Parts Within 15 Minutes If You Fill Out The Instant RFQ Form.
Request for Quote
